Hydraulic Fracture（ Slickwater fracturing fluid） - phpa emulsion,friction reducer manufacturers and suppliers -Qinhuangdao Jinjia Petrochemical Co., Ltd

LOCATION: Products > Polyacrylamide emulsions > Hydraulic Fracture Slickwater fracturing fluid

Hydraulic Fracture（ Slickwater fracturing fluid）

I. System characteristics

Hydraulic Fracture ，we also call it slickwater, is generally composed of drag

reducing agent, fungicide, viscosity stabilizer, auxiliary agent and other components,

compared with the water, the friction pressure can be reduced by 70-80%, while a

strong anti-swelling properties, the viscosity is very low, Generally below 10 mPa.s.

composition	Item	Index
Friction Reduce JJ643(Anionic Emulsion )stabilizer	Appearance	White emulsion
	Density，g/m³	0.85-0.90
	Use concentration，%	0.05-0.20.Recommended 0.10
Clay stabilizer nw-100	Appearance	Brown red solid powder
	Density，g/m³	0.90-0.95
	Use concentration，%	0.02-0.10.Recommended 0.05
Surfactant ACD-100	Appearance	Yellow viscous liquid
	Density，g/m³	1.0-1.05
	Use concentration，%	0.01-0.05.Recommended 0.01

II.Performance parameters

Item	Index
Fracturing fluid appearance	Colorless transparent viscous liquid
PH	6.0-8.0
Drag reduction rate，%	》70.0
dynamic viscosity，	《10.0
Anti - inflation rate，%	》90.0
Surface Tension，mN/m	《28.0
Interfacial tension， mN/m	《2.0
Fracture rate of fracturing fluid，%	》60
Core penetration retention rate，%	》90
Compatibility of pharmaceuticals	No precipitation, no flocculation

III. The ionic composition of several dosing fluids

IV.Drag reduction results

未标题-2.jpg